WorkHands WorkHands

Integra Shaved Bay - Kandy Teal

This job was a basic shaved engine bay on a 1995 Acura Integra, but first it needed lots of repairs due to a very poor previous attempt at the same work. I began by abrasive blasting the entire bay, and then I cut out the improperly welded patch panels. I welded in each patch correctly, applied fiberglass reinforced filler where necessary for strength, then applied a light skim of poly filler to finish off the body work. Over the completed filler work, I sprayed polyester primer, then block sanded it out to prepare for paint. The base coat was a coarse silver metallic with silver metal flake mixed in for effect. The color is a custom mix of House of Kolor Oriental Blue and Teal kandies.
More August 10

  • F9843d84ba24bf91c72a18ed59435815
    This job was a basic shaved engine bay on a 1995 Acura Integra, but first it needed lots of repairs due to a very poor previous attempt at the same work. I began by abrasive blasting the entire bay, and then I cut out the improperly welded patch panels. I welded in each patch correctly, applied fiberglass reinforced filler where necessary for strength, then applied a light skim of poly filler to finish off the body work. Over the completed filler work, I sprayed polyester primer, then block sanded it out to prepare for paint. The base coat was a coarse silver metallic with silver metal flake mixed in for effect. The color is a custom mix of House of Kolor Oriental Blue and Teal kandies.
  • 8058000d3b1acd3b053520687404fd21
    This job was a basic shaved engine bay on a 1995 Acura Integra, but first it needed lots of repairs due to a very poor previous attempt at the same work. I began by abrasive blasting the entire bay, and then I cut out the improperly welded patch panels. I welded in each patch correctly, applied fiberglass reinforced filler where necessary for strength, then applied a light skim of poly filler to finish off the body work. Over the completed filler work, I sprayed polyester primer, then block sanded it out to prepare for paint. The base coat was a coarse silver metallic with silver metal flake mixed in for effect. The color is a custom mix of House of Kolor Oriental Blue and Teal kandies.
  • 3664540f6dabf09abbac4f695852fce4
    This job was a basic shaved engine bay on a 1995 Acura Integra, but first it needed lots of repairs due to a very poor previous attempt at the same work. I began by abrasive blasting the entire bay, and then I cut out the improperly welded patch panels. I welded in each patch correctly, applied fiberglass reinforced filler where necessary for strength, then applied a light skim of poly filler to finish off the body work. Over the completed filler work, I sprayed polyester primer, then block sanded it out to prepare for paint. The base coat was a coarse silver metallic with silver metal flake mixed in for effect. The color is a custom mix of House of Kolor Oriental Blue and Teal kandies.
  • Ae58af251765b7b4245e1a8783fefa5e
    This job was a basic shaved engine bay on a 1995 Acura Integra, but first it needed lots of repairs due to a very poor previous attempt at the same work. I began by abrasive blasting the entire bay, and then I cut out the improperly welded patch panels. I welded in each patch correctly, applied fiberglass reinforced filler where necessary for strength, then applied a light skim of poly filler to finish off the body work. Over the completed filler work, I sprayed polyester primer, then block sanded it out to prepare for paint. The base coat was a coarse silver metallic with silver metal flake mixed in for effect. The color is a custom mix of House of Kolor Oriental Blue and Teal kandies.
  • Cc4950c99f7ac2ff76ba258ec304403d
    This job was a basic shaved engine bay on a 1995 Acura Integra, but first it needed lots of repairs due to a very poor previous attempt at the same work. I began by abrasive blasting the entire bay, and then I cut out the improperly welded patch panels. I welded in each patch correctly, applied fiberglass reinforced filler where necessary for strength, then applied a light skim of poly filler to finish off the body work. Over the completed filler work, I sprayed polyester primer, then block sanded it out to prepare for paint. The base coat was a coarse silver metallic with silver metal flake mixed in for effect. The color is a custom mix of House of Kolor Oriental Blue and Teal kandies.
  • 407745cb789418b1cf7435f0e3089ddf
    This job was a basic shaved engine bay on a 1995 Acura Integra, but first it needed lots of repairs due to a very poor previous attempt at the same work. I began by abrasive blasting the entire bay, and then I cut out the improperly welded patch panels. I welded in each patch correctly, applied fiberglass reinforced filler where necessary for strength, then applied a light skim of poly filler to finish off the body work. Over the completed filler work, I sprayed polyester primer, then block sanded it out to prepare for paint. The base coat was a coarse silver metallic with silver metal flake mixed in for effect. The color is a custom mix of House of Kolor Oriental Blue and Teal kandies.
  • A5a4271b5edbc524c685956b88eba96d
    This job was a basic shaved engine bay on a 1995 Acura Integra, but first it needed lots of repairs due to a very poor previous attempt at the same work. I began by abrasive blasting the entire bay, and then I cut out the improperly welded patch panels. I welded in each patch correctly, applied fiberglass reinforced filler where necessary for strength, then applied a light skim of poly filler to finish off the body work. Over the completed filler work, I sprayed polyester primer, then block sanded it out to prepare for paint. The base coat was a coarse silver metallic with silver metal flake mixed in for effect. The color is a custom mix of House of Kolor Oriental Blue and Teal kandies.
  • C48ba5f9fc350cda569a22558f995349
    This job was a basic shaved engine bay on a 1995 Acura Integra, but first it needed lots of repairs due to a very poor previous attempt at the same work. I began by abrasive blasting the entire bay, and then I cut out the improperly welded patch panels. I welded in each patch correctly, applied fiberglass reinforced filler where necessary for strength, then applied a light skim of poly filler to finish off the body work. Over the completed filler work, I sprayed polyester primer, then block sanded it out to prepare for paint. The base coat was a coarse silver metallic with silver metal flake mixed in for effect. The color is a custom mix of House of Kolor Oriental Blue and Teal kandies.
  • 7bdc7a265a9df8de2ac3a25fd96a376f
    This job was a basic shaved engine bay on a 1995 Acura Integra, but first it needed lots of repairs due to a very poor previous attempt at the same work. I began by abrasive blasting the entire bay, and then I cut out the improperly welded patch panels. I welded in each patch correctly, applied fiberglass reinforced filler where necessary for strength, then applied a light skim of poly filler to finish off the body work. Over the completed filler work, I sprayed polyester primer, then block sanded it out to prepare for paint. The base coat was a coarse silver metallic with silver metal flake mixed in for effect. The color is a custom mix of House of Kolor Oriental Blue and Teal kandies.
  • 594ed9aaf64543a8575b0b817e5d361f
    This job was a basic shaved engine bay on a 1995 Acura Integra, but first it needed lots of repairs due to a very poor previous attempt at the same work. I began by abrasive blasting the entire bay, and then I cut out the improperly welded patch panels. I welded in each patch correctly, applied fiberglass reinforced filler where necessary for strength, then applied a light skim of poly filler to finish off the body work. Over the completed filler work, I sprayed polyester primer, then block sanded it out to prepare for paint. The base coat was a coarse silver metallic with silver metal flake mixed in for effect. The color is a custom mix of House of Kolor Oriental Blue and Teal kandies.
  • 3a1d3bb6952ba21ab54f4066096c51c2
    This job was a basic shaved engine bay on a 1995 Acura Integra, but first it needed lots of repairs due to a very poor previous attempt at the same work. I began by abrasive blasting the entire bay, and then I cut out the improperly welded patch panels. I welded in each patch correctly, applied fiberglass reinforced filler where necessary for strength, then applied a light skim of poly filler to finish off the body work. Over the completed filler work, I sprayed polyester primer, then block sanded it out to prepare for paint. The base coat was a coarse silver metallic with silver metal flake mixed in for effect. The color is a custom mix of House of Kolor Oriental Blue and Teal kandies.
  • 1bd86b499247f2cd1140a0deb9f75e71
    This job was a basic shaved engine bay on a 1995 Acura Integra, but first it needed lots of repairs due to a very poor previous attempt at the same work. I began by abrasive blasting the entire bay, and then I cut out the improperly welded patch panels. I welded in each patch correctly, applied fiberglass reinforced filler where necessary for strength, then applied a light skim of poly filler to finish off the body work. Over the completed filler work, I sprayed polyester primer, then block sanded it out to prepare for paint. The base coat was a coarse silver metallic with silver metal flake mixed in for effect. The color is a custom mix of House of Kolor Oriental Blue and Teal kandies.